| 李锋,刘跳民,裴森龙,闫新亮,刘伯成.老挝纳勐铜多金属矿区坚硬“打滑”地层钻进方法[J].矿产勘查,2016,7(6):1023-1027 |
| 老挝纳勐铜多金属矿区坚硬“打滑”地层钻进方法 |
| Drilling method in hard and slipping strata in Nameung copper polymetallic deposit area in Laos |
| 投稿时间：2016-03-22 |
| DOI： |
| 中文关键词: 坚硬打滑地层 齿轮钻头 老挝 纳勐铜多金属矿 |
| 英文关键词: hard and slipping strata, roller bit, Nameung copper polymetallic deposit area, Laos |
| 基金项目: |
|
| 摘要点击次数: 2547 |
| 全文下载次数: 1714 |
| 中文摘要: |
| 在老挝纳勐铜多金属矿区存在一层坚硬致密的弱研磨性的“打滑”地层,钻头消耗极大,钻进效率极低,严重影响了施工进度。文章结合项目的生产实际情况,对钻进参数进行优化,选取适宜于该地层的金刚石钻头进行钻进试验,经过实践验证,大大提高了钻进效率,在该地层取得了良好的应用效果。总结了生产实践中取得的成功经验,对以后在该类型地层进行钻探施工,可以起到很好的指导作用。 |
| 英文摘要: |
| In Nameung copper polymetallic deposit area in Laos, there is common existence of hard, slipping and weak-abrasive strata. These result in extremely low drilling efficiency and dimond bit consumption greatly. These impact seriously on the drilling progress. Based on practical drilling test work in Laos, the drilling parameters and selection of diamond bit were optimized which greatly increased the drilling efficiency, and sounding drilling effects were achieved in the deposit area. Finally, the successful drilling experience in Laos project was summarized in order to guide the future drilling work in similar type of strata. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|