| 罗华彪.实测地质剖面及成图方法研究[J].矿产勘查,2015,6(1):62-66 |
| 实测地质剖面及成图方法研究 |
| Study on mapped geological profile and mapping method |
| |
| DOI： |
| 中文关键词: 实测 地质剖面 剖面基线 展开法 投影法 |
| 英文关键词: mapped, geological profile, profile baseline, unfolding method, projection method |
| 基金项目: |
|
| 摘要点击次数: 4617 |
| 全文下载次数: 2385 |
| 中文摘要: |
| 实测地质剖面工作是地质测量工作的基础,其工作质量对后续工作影响较大,由于实测地质剖面测量过程和成图方法没有规范、规程严格限定,致使其质量是否达到地质要求不好评定,甚至出现与实际地质情况不符的现象。文章试图提出实测过程中不能偏离设计基线的最大距离并分析其原因,根据不同的情况,论证不同条件下使用不同的成图方法,以达到真实反映地质现象的目的。 |
| 英文摘要: |
| The geological mapped profile work is the basis of geological survey work, which has greater effect on the subsequent quality of geological work. Due to no standard and rules for the field mapped profiles and subsequent indoor mapping, therefore, it results in the difficulty to judge the quality of the mapped profile and its final paper products. In some cases, the mapped profile and final geological map are not consistent with the practical geological phenomenon. In this paper, the author proposes the maximum deviation distance from the baseline in the actual profile mapping operation and analyzes the reasons. According to different situations, different mapping methods are applied for producing the final geological maps for achieving the purpose of reflecting the practical geological facts. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|