| 胡建明,杨雪山.基于三维模型的断面法体积计算应用研究[J].矿产勘查,2018,9(3):406-412 |
| 基于三维模型的断面法体积计算应用研究 |
| Application of 3D model method to volume calculation of section method |
| 投稿时间：2017-05-03 |
| DOI： |
| 中文关键词: 断面法 体积计算 三维模型 3DMine软件 |
| 英文关键词: section method, volume calculation,3D model,3DMine software |
| 基金项目:国家矿产资源储量技术标准体系建设项目(编号:CB2015-5-4)资助。 |
|
| 摘要点击次数: 2207 |
| 全文下载次数: 1201 |
| 中文摘要: |
| 断面法是矿产资源储量估算中最为广泛应用的方法之一,其中不同断面形态的体积计算公式是广大技术人员所熟知的。然而,在计算机软件特别是三维模型软件普及应用的今天,各种不同类型的断面形态、断面内夹石的剔除以及不平行断面间体积计算逐渐由传统二维方式转变成三维模型方式,从而使得计算过程变得自动、准确和高效。文章结合3DMine软件的三维模型方法,根据实际数据,研究断面法体积的计算方法、对比分析和应用思路。 |
| 英文摘要: |
| Section method is one of the most widely used methods for estimating mineral reserves. The formula of volume calculation for different section shapes is well known by many technicians. However,due to the popularization and application of computer softwares especially three-dimensional model softwares, section form, section of different types in stone removal and parallel section volume calculated by the formula of traditional two-dimensional into three-dimensional model, so that the calculation process becomes automatic, accurate and efficient. Based on the three-dimensional model of the 3DMine software, according to the actual data,the paper analyzed the calculation method of section volume, contrasting and application. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|